Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 22.225 mm x 50.8 mm x 14.288 mm skf RLS 7-2Z Deep groove ball bearings
- 3.543 Inch | 90 Mill
- Shaft Mount
- 850 mm x 1030 mm x 82 mm skf 618/850 MA Deep groove ball bearings
- 1.25 Inch | 31.75 Mi
- Bearing
- 5 mm x 9 mm x 3 mm skf W 637/5 XR-2Z Deep groove ball bearings
- Sealed
- CARTER MFG. CO.
- 9,525 mm x 22,225 mm x 24,613 mm skf D/W R6 R Deep groove ball bearings
- Mounted Units &
- 0.0
- 70 mm x 150 mm x 35 mm skf 6314-2Z Deep groove ball bearings
- Tapered Roller Beari
- TIMKEN
- 20 mm x 32 mm x 7 mm skf W 61804 R-2Z Deep groove ball bearings
- Wide Inner Ring | No
- No
- 120 mm x 150 mm x 16 mm skf 61824-2RS1 Deep groove ball bearings
- LINK BELT
- M06110
