Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- NTN 6208 Bearing
- BEARINGS LIMITED
- B04144
- 17 mm x 30 mm x 7 mm skf 61903-2RZ Deep groove ball bearings
- Pillow Block
- Bearing
- 40 mm x 80 mm x 18 mm skf 6208-RSH Deep groove ball bearings
- Self Aligning Ball B
- Metric
- 8 mm x 28 mm x 9 mm skf W 638 Deep groove ball bearings
- 38.1 mm
- 15.9 mm
- 80 mm x 140 mm x 26 mm skf 6216-RS1 Deep groove ball bearings
- C0-Medium
- Angular Contact Ball
- 35 mm x 80 mm x 21 mm skf 6307-2Z Deep groove ball bearings
- CONSOLIDATED BEARING
- 0.313 Inch | 7.95 Mi
- 10 mm x 19 mm x 5 mm skf W 61800 R-2Z Deep groove ball bearings
- 0800675090852
- N/A
- 1320 mm x 1720 mm x 128 mm skf 609/1320 MB Deep groove ball bearings
- 0.30 Kg
- 59.44 mm