Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 35 mm x 10 mm skf 6003-RSL Deep groove ball bearings
- 0.197 Inch | 5 Milli
- Needle Roller Bearin
- 95 mm x 170 mm x 32 mm skf 6219-RS1 Deep groove ball bearings
- 1.188 Inch | 30.175
- Flange Block Bearing
- 2,5 mm x 6 mm x 1,8 mm skf W 618/2.5 R Deep groove ball bearings
- 25/64 Inch
- 31171501
- 5 mm x 11 mm x 4 mm skf W 628/5-2Z Deep groove ball bearings
- 0.0
- 1.5 Inch | 38.1 Mill
- 20 mm x 32 mm x 7 mm skf W 61804-2RZ Deep groove ball bearings
- 161000 lbf
- 0.12 in
- 35 mm x 72 mm x 17 mm skf W 6207-2Z Deep groove ball bearings
- N/A
- Assembly; Standard P
- 17 mm x 35 mm x 10 mm skf 6003-RSH Deep groove ball bearings
- Mounted Units &
- N/A
- 25 mm x 52 mm x 15 mm skf W 6205-2RS1 Deep groove ball bearings
- Lubrication Fitting
- 3.3125 in