Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 35 mm x 72 mm x 17 mm skf 7207 BECBY Single row angular contact ball bearings
- CONSOLIDATED BEARING
- No
- 35 mm x 72 mm x 17 mm skf 7207 BECBP Single row angular contact ball bearings
- Pillow Block
- 0 Inch | 0Millimeter
- 300 mm x 460 mm x 74 mm skf 7060 AGM Single row angular contact ball bearings
- Bearings
- BUNTING BEARING CORP
- 180 mm x 380 mm x 75 mm skf 7336 BCBM Single row angular contact ball bearings
- CONSOLIDATED BEARING
- Roller Bearings
- 40 mm x 110 mm x 27 mm skf 7408 BGBM Single row angular contact ball bearings
- Precision Ball Beari
- Yes
- 850 mm x 1220 mm x 165 mm skf 70/850 AMB Single row angular contact ball bearings
- Tapered Roller Beari
- 8482.20.00.00