Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 85 mm x 210 mm x 52 mm skf 7417 BAGAMC Single row angular contact ball bearings
- BEARINGS LIMITED
- Bearings
- 35 mm x 72 mm x 17 mm skf 7207 BECBPH Single row angular contact ball bearings
- 2.25 Inch | 57.15 Mi
- 0 Inch | 0 Millimete
- 60 mm x 130 mm x 31 mm skf 7312 BECBP Single row angular contact ball bearings
- 1.438 Inch | 36.525
- 0.795
- 35 mm x 100 mm x 25 mm skf 7407 BCBM Single row angular contact ball bearings
- 0.0
- PEER BEARING CO.
- 20 mm x 47 mm x 14 mm skf 7204 BEGBP Single row angular contact ball bearings
- B00308
- PEER BEARING CO.
- 60 mm x 130 mm x 31 mm skf 7312 BECBY Single row angular contact ball bearings
- Flange Block Bearing
- 11.4