Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 50 mm x 90 mm x 20 mm skf 7210 BEGBP Single row angular contact ball bearings
- 31171501
- Flange Block Bearing
- 70 mm x 150 mm x 35 mm skf 7314 BEGAJ Single row angular contact ball bearings
- Roller Bearings
- TIMKEN
- 140 mm x 250 mm x 42 mm skf 7228 BGAM Single row angular contact ball bearings
- 0 Inch | 0 Millimete
- 5.125 Inch | 130.18
- 30 mm x 62 mm x 16 mm skf 7206 BEGAJ Single row angular contact ball bearings
- 4 Bolt Square Flange
- Flange Block Bearing
- 30 mm x 72 mm x 19 mm skf 7306 BECBP Single row angular contact ball bearings
- With Pilot
- 3.75 Inch | 95.25 Mi