Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 280 mm x 500 mm x 80 mm skf 7256 BM Single row angular contact ball bearings
- 4547359488517
- 2 Rib Outer Ring | O
- 460 mm x 680 mm x 100 mm skf 7092 BM Single row angular contact ball bearings
- 3 Inch | 76.2 Millim
- TIMKEN
- 75 mm x 130 mm x 25 mm skf 7215 BECBPH Single row angular contact ball bearings
- 2 Single Cone | 1 Do
- N/A
- 25 mm x 62 mm x 17 mm skf 7305 BE-2RZP Single row angular contact ball bearings
- N/A
- BEARINGS LIMITED
- 50 mm x 130 mm x 31 mm skf 7410 BM Single row angular contact ball bearings
- ISOSTATIC INDUSTRIES
- ISOSTATIC
- 55 mm x 140 mm x 33 mm skf 7411 BGBM Single row angular contact ball bearings
- 4 Bolt Square Flange
- Non-expansion