Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 85 mm x 180 mm x 41 mm skf 7317 BECBY Single row angular contact ball bearings
- EE991201
- 528000 lbf
- 45 mm x 85 mm x 19 mm skf 7209 BE-2RZP Single row angular contact ball bearings
- Deep Groove | Electr
- No
- 85 mm x 180 mm x 41 mm skf 7317 BECBP Single row angular contact ball bearings
- Take Up Units
- 8483.20.40.80
- 45 mm x 85 mm x 19 mm skf 7209 BEGBY Single row angular contact ball bearings
- NSK
- 3.386 Inch | 86 Mill
- 380 mm x 480 mm x 31 mm skf 70876 AMB Single row angular contact ball bearings
- Bearing
- Ball Bearing
- 60 mm x 130 mm x 31 mm skf 7312 ACCBM Single row angular contact ball bearings
- Needle Non Thrust Ro
- No
- 60 mm x 110 mm x 22 mm skf 7212 BEGAM Single row angular contact ball bearings
- Round
- -40 to 250 ºF