Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 65 mm x 120 mm x 23 mm skf 7213 BECBP Single row angular contact ball bearings
- N/A
- 7 Inch | 177.8 Milli
- 50 mm x 90 mm x 20 mm skf 7210 BE-2RZP Single row angular contact ball bearings
- SG216EL
- Non-expansion
- 60 mm x 130 mm x 31 mm skf 7312 BEM Single row angular contact ball bearings
- REGAL BELOIT
- Non-expansion
- 670 mm x 980 mm x 136 mm skf 70/670 AMB Single row angular contact ball bearings
- 0.787 Inch | 20 Mill
- No
- 60 mm x 130 mm x 31 mm skf 7312 BEP Single row angular contact ball bearings
- No
- 3.937 Inch | 100 Mil