Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 47 mm x 14 mm skf 6303-RSL Deep groove ball bearings
- 6 Inch | 152.4 Milli
- 22215
- 65 mm x 140 mm x 33 mm skf 313-2Z Deep groove ball bearings
- 0 Inch | 0 Millimete
- 4 Bolt Square Flange
- 17 mm x 47 mm x 14 mm skf 6303-RSH Deep groove ball bearings
- 31171510
- 1220 kN
- 65 mm x 120 mm x 23 mm skf 6213 N Deep groove ball bearings
- 0.0
- 1.25 Inch | 31.75 Mi
- 40 mm x 80 mm x 18 mm skf 6208-Z Deep groove ball bearings
- 0800675159979
- PT INTERNATIONAL
- 55 mm x 120 mm x 29 mm skf 6311-2RSH Deep groove ball bearings
- Yes
- Angular Contact Ball
- 50 mm x 72 mm x 12 mm skf W 61910-2RS1 Deep groove ball bearings
- 12.000 mm
- 0.64 mm
- 85 mm x 130 mm x 22 mm skf 6017 N Deep groove ball bearings
- Metric
- Ball Angular Contact
- 25 mm x 62 mm x 24 mm skf 62305-2RS1 Deep groove ball bearings
- Precision Ball Beari
- 2.559 Inch | 65 Mill
- 6 mm x 17 mm x 6 mm skf W 606 R-2Z Deep groove ball bearings
- B04264
- Sleeve Bearings