Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 90 mm x 125 mm x 18 mm skf W 61918-2RS1 Deep groove ball bearings
- 2.5 Inch | 63.5 Mill
- 2 Bolt Pillow Block
- 3.175 mm x 9.525 mm x 3.967 mm skf D/W R2 R-2RZ Deep groove ball bearings
- 8483.20.40.80
- M06288
- 60 mm x 130 mm x 31 mm skf 6312-RSH Deep groove ball bearings
- N/A
- INS-IP-300L
- 75 mm x 130 mm x 25 mm skf 215-ZNR Deep groove ball bearings
- Bearings
- M06110
- 45 mm x 120 mm x 29 mm skf 6409 N Deep groove ball bearings
- Not Applicable Inch
- Yes
- 8 mm x 24 mm x 8 mm skf 628-2RZ Deep groove ball bearings
- Not Applicable
- 13.386 Inch | 340 Mi
- 6,35 mm x 19,05 mm x 7,142 mm skf D/W R4A-2Z Deep groove ball bearings
- Bearings
- 0053893444758
- 1000 mm x 1220 mm x 71 mm skf 608/1000 MB Deep groove ball bearings
- 0
- Mounted Units &