Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 100 mm x 125 mm x 13 mm skf 61820-2RS1 Deep groove ball bearings
- 2.25 Inch | 57.15 Mi
- B04334
- 65 mm x 120 mm x 23 mm skf 6213-2Z Deep groove ball bearings
- Bearing
- 15 Degree
- 5 mm x 13 mm x 4 mm skf 619/5-2Z Deep groove ball bearings
- 12MM Nominal Bore; 1
- ISOSTATIC INDUSTRIES
- 15 mm x 24 mm x 7 mm skf W 63802-2RS1 Deep groove ball bearings
- ALTRA INDUSTRIAL MOT
- Sleeve Bearings
- 10 mm x 30 mm x 9 mm skf 6200 N Deep groove ball bearings
- 3.33 Inch | 84.582 M
- Cast Steel
- 90 mm x 140 mm x 24 mm skf 6018-2Z Deep groove ball bearings
- 5.875 Inch | 149.225
- 16.6 Inch | 420.7 Mi
- 15.875 mm x 34.925 mm x 8.733 mm skf D/W R10-2Z Deep groove ball bearings
- 0 Inch | 0 Millimete
- 31171516
- 8 mm x 22 mm x 7 mm skf 608-Z Deep groove ball bearings
- Bearing
- 0644075255189