DGB BEARING IMPORTED LTD

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis  to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (from the data table): the larger the value of e, the larger the contact angle.

Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in 1898 and today offers the world's widest variety in inch and metric sizes.

In the HR series, the rollers are increased in both size and number giving it an even higher load capacity. They are generally mounted in pairs in a manner similar to single-row angular contact ball bearings. In this case, the proper internal clearance can be obtained by adjusting the axial distance between the cones or cups of the two opposed bearings. Since they are separable, the cone assemblies and cups can be mounted independently.
 

 

 

 

 

 

 

190 mm x 290 mm x 64 mm NTN 32038XUE1 Single row tapered roller bearings
4284.4 N·m
691 kN
200 mm x 310 mm x 70 mm NTN 32040XUE1 Single row tapered roller bearings
0 Inch | 0 Millimete
0 Inch | 0 Millimete
190 mm x 290 mm x 64 mm NTN 32038XU Single row tapered roller bearings
0.66
Plain Inner Ring | 2
180 mm x 280 mm x 64 mm NTN 32036XU Single row tapered roller bearings
0 Inch | 0 Millimete
1.5 Inch | 38.1 Mill
140 mm x 210 mm x 45 mm NTN 32028XU Single row tapered roller bearings
240 r/min
100
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Double row spherical roller bearings
Plain bearings,Bushings
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
SAF and SAW pillow blocks with bearings on an adapter sleeve
Single row angular contact ball bearings
Single row cylindrical roller bearings
Single row deep groove ball bearings
Single row or matched pairs of angular contact ball bearings
Single row tapered roller bearings
SKF Speedi-Sleeve
SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Solid Block/Spherical Roller Bearing Housed Units-Double Concentric Four-Bolt Pillow Block
skf 47697 Bearing
6201 c3 Bearing
skf 6006 2rs Bearing
hms5 Bearing
Large Slewing Bearings
Slewing Ring Bearings
Kaydon Slewing Bearing
Bearing Slewing Ring
Super Precision Bearing
Super Precision Angular Contact Bearings
Super Precision Bearings
Double Sided Serpentine Belt
K060841 Belts
Ribbed Belts
Drive Belt Serpentine Belt
Gates 507c