Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 30 mm x 72 mm x 19 mm skf 7306 BECBM Single row angular contact ball bearings
- 4.331 Inch | 110 Mil
- NSK
- 45 mm x 85 mm x 19 mm skf 7209 BEGAY Single row angular contact ball bearings
- 0.0
- BUNTING BEARINGS
- 340 mm x 460 mm x 56 mm skf 71968 ACMB Single row angular contact ball bearings
- Cylindrical Roller B
- 6.349
- 85 mm x 180 mm x 41 mm skf 7317 BECBM Single row angular contact ball bearings
- 31171511
- 2 Bolt Pillow Block
- 170 mm x 310 mm x 52 mm skf 7234 BCBM Single row angular contact ball bearings
- No
- 14MM Bore; 20MM Outs
- 320 mm x 440 mm x 56 mm skf 71964 AC Single row angular contact ball bearings
- Ceramic
- 0.63 Inch | 16 Milli
- 45 mm x 85 mm x 19 mm skf 7209 BEGAPH Single row angular contact ball bearings
- QM INDUSTRIES
- Flange Block