Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 55 mm x 140 mm x 33 mm skf 7411 BM Single row angular contact ball bearings
- 2 Rib Outer Ring | S
- No
- 600 mm x 800 mm x 90 mm skf 719/600 ACM Single row angular contact ball bearings
- TIMKEN
- 2.441 Inch | 62 Mill
- 30 mm x 72 mm x 19 mm skf 7306 BEGBY Single row angular contact ball bearings
- 0080067507353
- 5.176
- 260 mm x 400 mm x 65 mm skf 7052 BGM Single row angular contact ball bearings
- 84833080
- 0846802058562
- 380 mm x 560 mm x 82 mm skf 7076 BGM Single row angular contact ball bearings
- 0.618
- Plain Spherical Radi
- 55 mm x 120 mm x 29 mm skf 7311 BEGBY Single row angular contact ball bearings
- Metric
- Ball Bearing