Single row angular contact ball bearings
Single row angular contact ball bearings. SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
- 460 mm x 680 mm x 100 mm skf 7092 AM Single row angular contact ball bearings
- 5.512 Inch | 140 Mil
- Yes
- 750 mm x 920 mm x 78 mm skf 718/750 ACMB Single row angular contact ball bearings
- IPTCI BEARINGS
- Cast Iron
- 55 mm x 100 mm x 21 mm skf 7211 BEP Single row angular contact ball bearings
- Stamped Steel
- 3 lb
- 140 mm x 250 mm x 42 mm skf 7228 BCBM Single row angular contact ball bearings
- Assembly
- 8482.20.00.00
- 80 mm x 200 mm x 48 mm skf 7416 M Single row angular contact ball bearings
- 0644075108508
- 2.07
- 20 mm x 52 mm x 15 mm skf 7304 BEGBP Single row angular contact ball bearings
- 0644075110754
- 0.688 Inch | 17.475
- 90 mm x 225 mm x 54 mm skf 7418 CBM Single row angular contact ball bearings
- Spherical Roller Bea
- Take Up Units