Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 12.7 mm x 33.338 mm x 9.525 mm skf RLS 4-2Z Deep groove ball bearings
- 1.179
- ABB MOTORS AND MECHA
- 80 mm x 100 mm x 10 mm skf 61816-2RZ Deep groove ball bearings
- 9.625 Inch | 244.475
- 2.559 Inch | 65 Mill
- 50 mm x 80 mm x 23 mm skf 63010-2RS1 Deep groove ball bearings
- 0.5 Inch | 12.7 Mill
- S9KDD
- 40 mm x 80 mm x 18 mm skf 6208 NR Deep groove ball bearings
- DODGE
- 0782475224012
- 20 mm x 32 mm x 7 mm skf W 61804-2RS1 Deep groove ball bearings
- Single V-Lock
- 950 rpm
- 10 mm x 15 mm x 3 mm skf W 61700 R Deep groove ball bearings
- 100 °C
- 23.2 kN
- 7 mm x 14 mm x 5 mm skf W 628/7-2RZ Deep groove ball bearings
- IPTCI BEARINGS
- Mounted Units &
- 30 mm x 62 mm x 16 mm skf 6206-RSH Deep groove ball bearings
- Light Series
- Felt Type
- 8 mm x 22 mm x 7 mm skf W 608-2Z Deep groove ball bearings
- Cast Steel
- Spherical Roller Bea
- 65 mm x 140 mm x 48 mm skf 62313-2RS1 Deep groove ball bearings
- 20 Degree
- 35MM Bore; 72MM Outs