| No. | Brand | n | G | Z | e | B | H | E | L |
| SAW 23518 x 3.1/4 T | skf | - | M6x1 | - | - | - | 42.9 mm | - | 165 mm |
| SAW 23544 TLC | skf | - | - | - | - | - | - | 113.5 mm | - |
| FSAF 1517 x 3 TLC | skf | - | - | 44.4 mm | 10 mm | 38.1 mm | - | - | 125 mm |
| SSAFS 23048 KATLC x 8.1/2 | skf | - | - | 34.5 mm | - | - | - | - | 100 mm |
| SSAFS 23028 KA x 4.15/16 | skf | - | M6x1 | - | 29 mm | - | - | - | - |
| SAF 23056 KATLC x 9.15/16 | skf | - | - | - | - | - | - | - | - |
| SAFS 23034 KATLC x 5.15/16 | skf | - | M6x1 | - | - | 21.4 mm | - | - | 70 mm |
| SAFS 23028 KATLC x 4.13/16 | skf | - | - | - | - | - | - | - | - |
| FSAF 1617 T | skf | - | - | - | - | - | - | - | - |
| SAF 22615 TLC | skf | - | - | - | - | 21.4 mm | 78 mm | - | - |
| SSAFS 23038 KAT x 7 | skf | - | - | - | - | - | - | - | - |
| SAF 22522 x 4 TLC | skf | - | - | - | - | 23 mm | - | - | - |
| FSAF 23024 KATLC x 4 | skf | - | - | - | - | 52 mm | - | - | - |
| SSAFS 22517 T | skf | - | - | - | - | - | 124 mm | - | - |
| SAF 22632 TLC | skf | - | - | - | - | - | - | - | - |
| SAFS 22526 x 4.3/8 | skf | - | R1/8" | - | - | - | - | - | 264 mm |
| SSAFS 22544 x 7.7/8 TLC | skf | - | - | - | - | - | - | - | - |
| SAF 1609 T | skf | - | - | 59.9 mm | - | - | 47.6 mm | - | - |
| SAF 22616 x 2.3/4 T | skf | - | - | - | - | - | - | - | - |
| SSAFS 23040 KA x 7.3/16 | skf | - | - | - | - | - | - | - | - |
| SAFS 22528 x 5 TLC | skf | - | - | - | - | - | - | - | - |
| SAF 23034 KATLC x 5.13/16 | skf | - | - | - | - | - | - | - | - |
| SAFS 22530 x 5.3/8 TLC | skf | - | - | - | - | - | - | - | - |
| SAF 1520 x 3.5/16 T | skf | - | R1/8" | - | - | 61.8 mm | - | 20 mm | 150 mm |
| SAF 1518 x 3.1/4 T | skf | - | - | - | - | - | - | - | - |
| SAF 22544 x 7.1/2 T | skf | - | - | - | - | - | - | - | - |
| FSAF 22617 x 3 | skf | - | M6x1 | - | - | - | - | - | 162 mm |
| FSAF 22518 x 3.1/16 TLC | skf | - | - | - | - | - | - | - | - |
| skf SSAFS 22524 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | d:38.1 mm; C0:18.2 kN; A1:15 mm; B1:43.7 mm; T max.:100 °C; G:M6x1; N:16mm; s1:33.4 mm; Recommended tightening torque for set screw:8 Nm; J:102 mm; |
| skf FSAF 1613 T SAF and SAW pillow blocks with bearings on an adapter sleeve | C1:12.1 mm; d1:97 mm; C0:60.5 kN; B:65.1 mm; C:38 mm; T min.:-40 °C; SW:6 mm; d:65 mm; D:140 mm; T max.:100 °C; |
| skf FSAF 1517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | Designation of bearing:UC211-32G2; H1:22 mm; J:171 mm; Designation of housing:P211-; H:63.5 mm; N:20mm; A:60 mm; L1:70 mm; A1:40 mm; L:219 mm; |
| skf SAF 22526 x 4.1/2 SAF and SAW pillow blocks with bearings on an adapter sleeve | N:19mm; H2:51 mm; C0:6.65 kN; C:12.8 kN; d:20 mm; A:32 mm; H:89 mm; N1:16 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; |
| skf SAF 22616 x 2.3/4 T SAF and SAW pillow blocks with bearings on an adapter sleeve | rs min:0.6 mm; da max:23 mm; da min:21 mm; Characteristic cage frequency, FTF:0.38 Hz; Characteristic rolling element frequency, BSF:3.78 Hz; Brand:NTN; Min operating temperature, Tmin:-25 °C; d:17 mm; Characteristic inner ring frequency, BPFI:4.37 Hz; Max operating temperature, Tmax:110 °C; |
| skf SAFS 23052 KATLC x 9.7/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | hidTable:ecat_NSCLDR; Fw:70.5; r1:2; Oil rpm:5600; KBRG:4152; ra:2; TSR rpm:6000; D_:120; db min:64; DA_:18; |
| skf SAFS 22517 x 3 SAF and SAW pillow blocks with bearings on an adapter sleeve | A5:19.7 mm; s1:17 mm; G:M6x1; A1:12 mm; A2:24 mm; P:150 mm; d:22.22 mm; C0:7.88 kN; SW:3.18 mm; L3:51 mm; |
| skf SAFS 22534 x 5.7/8 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | Mass:0.07 kg; Maximum Capacity / Filling Slot:No; Static load, C0:4.8 kN; Category:Single Row Ball Bear; Fatigue limit load, Cu:0.22 kN; Brand:NTN; Outside Diameter:1.575 Inch | 40 Mill; Radial clearance class:CN; Minimum Buy Quantity:N/A; Dynamic load, C:7.35 kN; |
| skf SAW 23544 x 7.1/2 SAF and SAW pillow blocks with bearings on an adapter sleeve | C0:6.65 kN; L:60 mm; e:15 mm; B:34 mm; T max.:200 °C; B1:43.5 mm; Recommended tightening torque for set screw:3.7 Nm; A:25.5 mm; T min.:-20 °C; d1:32.4 mm; |
| skf SAF 22522 x 4 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve | Static load, C0:24 kN; Characteristic rolling element frequency, BSF:4.08 Hz; Nlim (grease):5,300 rpm; da min:48 mm; ra max:1.5 mm; Radial clearance class:CN; B:23 mm; Mass:0.63 kg; Brand:NTN; Max operating temperature, Tmax:110 °C; |
| skf FSAF 1615 SAF and SAW pillow blocks with bearings on an adapter sleeve | fo:15; hidYobi:MR85; KBRG:6102; DE_:7.5; D_:8; SRIX:0.01; D_a:7.2; SREX:0.01; Cr:31; B0:2; |
| skf SAF 23040 KA x 7.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve | Characteristic rolling element frequency, BSF:8.36 Hz; Static load, C0:109 kN; Nlim (oil):3,500 rpm; ra max:2 mm; Characteristic outer ring frequency, BPF0:7.06 Hz; rs min:2 mm; Characteristic cage frequency, FTF:0.44 Hz; d:140 mm; Dynamic load, C:110 kN; D:210 mm; |
| skf FSAF 22616 SAF and SAW pillow blocks with bearings on an adapter sleeve | Minimum Buy Quantity:N/A; Weight / Kilogram:0; D:83.06 mm; EAN:4547359523812; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:120 °C; Brand:NTN; Category:Roller Bearings; Product Group:B04334; C:19.05 mm; |
| skf SAF 22622 x 3.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve | Weight:1.060 kg; Limiting Speed - Grease:5,300 rpm; ra1 (max):1.5 mm; r1:1.5 mm; Fillet Radius/Chamfer:1.5 mm; B:23 mm; D:120 mm; dd (min):87 mm; Dynamic Load Rating:84,000 N; Limiting Speed - Oil:6,300 rpm; |
skf FSAF 22613 x 2.1/4 TLC SAF and SAW pillow blocks with
skf FSAF 22613 x 2.1/4 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve Needs Analysis , SAF and SAW pillow blocks with bearings on an
skf FSAF 22613 x 2.1/4 SAF and SAW pillow blocks with
We Provide Extensive skf FSAF 22613 x 2.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve 156 mm H2 Selection And DGB BEARING
skf FSAF 22613 x 2.1/4 T SAF and SAW pillow blocks with bearings
How do you Standard Pillow Type, Category find the 123000 Basic Dynamic Load Rating Cr(N) skf FSAF 22613 x 2.1/4 T SAF and SAW pillow blocks with
SAF and SAW pillow blocks with bearings on an ...
SAF and SAW pillow blocks with bearings on an adapter sleeve. Calculation. Start Bearing Calculator for this product ... SAF 22613 x 2.1/4. Dimensions
Technical Specification - SKF
Split pillow blocks – SAF and SAW series (inch dimensions) ... FSAF 22613 X 2.1/4 T. SAF and SAW pillow blocks with bearings on an adapter sleeve
skf SAF 22613 x 2.1/4 SAF and SAW pillow blocks with bearings on
skf SAF 22613 x 2.1/4 SAF and SAW pil... Bearing No. SAF 22613 x 2.1/4 da. 57.15 mm. Da. 140 mm. Ca. 57.785 mm. A1. 88.9 mm. A2. 134.938 mm. S
skf FSAF 22613 x 2.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve Video