Deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 9 mm x 24 mm x 7 mm skf W 609-2RS1 Deep groove ball bearings
- TIMKEN
- 3.75 Inch | 95.25 Mi
- 60 mm x 85 mm x 13 mm skf 61912-2RZ Deep groove ball bearings
- 2 Piece | Corrosion
- 0.014
- 10 mm x 30 mm x 9 mm skf W 6200-2RZ Deep groove ball bearings
- 730.38 mm
- 47.12 mm
- 1250 mm x 1500 mm x 112 mm skf 618/1250 MB Deep groove ball bearings
- PT INTERNATIONAL
- 0.0
- 35 mm x 72 mm x 17 mm skf W 6207-2RS1/VP311 Deep groove ball bearings
- 1 Rib Outer Ring
- Miniature Precision
- 35 mm x 72 mm x 23 mm skf 62207-2RS1 Deep groove ball bearings
- 0888569024749
- BEARINGS LIMITED
- 12 mm x 24 mm x 6 mm skf W 61901 R-2RZ Deep groove ball bearings
- Sleeve Bearings
- 31171515
- 7 mm x 17 mm x 5 mm skf W 619/7 R-2Z Deep groove ball bearings
- Cone; Standard Preci
- Cone
- 75 mm x 160 mm x 37 mm skf 6315-2Z Deep groove ball bearings
- RBEC 1 | ISO P0
- Cylindrical Roller B